Elite Force LiPo 11.1v 1400mAh 15C Stick (Battery)
[V09D07][20027 / HK-2211007 / 2211007]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Please Note: Lithium Polymer batteries MUST be charged with a Lithium Polymer Balance Charger!
Description:
Lithium Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 11.1v Li-Po battery can deliver more power than 12v Ni-MH large type battery with only half of the size and a third of the battery cells.
Specifications:
Manufacturer: Tenergy
Voltage: 11.1v
Milliampere Hours: 1400mAh
Cell Type: Lithium Polymer (LiPo)
Connector Type: Mini
- The makers of LipoSack or its distributors or retailers assume no liability for failures to comply with these use and safety guidelines.
- By purchasing this product, the buyer assumes all risks associated with its intended use. If you cannot comply with these guidelines please return this product unused to your retailer.
1) Charge batteries in a safe area away from flammable materials and only on a non-flammable surface in a vented area. Do not discharge batteries below 3 volts/cell. Doing so may result in cell damage and subsequent cell venting upon a subsequent charge.
2) Do not recharge damaged batteries. Dispose of damaged batteries in the proper manner.
3) Some Lipo chargers on the market may have technical deficiencies that may cause it to charge the battery incorrectly or at an improper rate. It is your sole responsibility to assure that the charger you purchased works properly. Always monitor the charging process to assure batteries are being charged properly. Failure to do so may result in cell damage or fire.
4) In the event of a crash, you must remove the battery from the model for observation and place in a safe open area away from flammable materials.
LipoSack Use Instructions:
1) Ensure that charger rate is properly set and polarity is correct.
2) Attach charging leads to battery.
3) Place battery in LipoSack towards the bottom.
4) Place LipoSack on non-flammable surface.
5) Route charge leads through vent at the top seam of the LipoSack.
6) Close top flap of LipoSack and press hook and loop closure fully closed.
7) Charge battery using proper charging practices.
LiPoSack Use and Safety Instructions:
Battery safety:
∑ Lithium Polymer batteries are volatile. Failure to adhere to established charging guidelines may result in fire, personal injury and damage to property if charged or used improperly.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: Elite Force / Umarex USA
- Color: Black
- Size: 5in x 0.75in x 0.60in
- Material: Lithium Polymer
- Package Includes: One (1) LiPo Battery
Great lipo, does what it does, no problems yet, they work the same as any other lipo on the market basically, but they did not fit in my Krytac Spr so now im going to buy 2 oteher lipos
Pros:
No Problems yet
Works like they are supposed to
Cons:
Did not fit in my Krytac so now I have to buy 2 different lipos :/
I really like this lipo. Tested it out in a few of my guns and it works like a charm. Even though it performs the same as other batteries, the larger capacity is a pro and con. Pro because 1400mah can go a long way. Con because this is longer and thicker (Giggity) it will not fit into most buffer tubes. But this thing has no problem fitting into stocks that have larger battery compartments. Just remember that you need a lipo balance charger for this thing. Please people, lipos charge differently.
Pros:
Larger capacity means it will last longer (Giggity), gives excellent performance for a 15c LiPo, matches my Elite Force AEG's.
Cons:
Larger capacity means a longer and thicker battery (Giggity), will not fit into all buffer tubes; only a few, but this can be overlooked.
|
Magpul Stock
I have a regular retracable stock for my m4 and want to get a magpul moe stock instead. Just wondering if it will fit.
2901 days ago Mack T
0
0
(I have this same question)
Staff Answer:
It should be able to fit in the buffer tube 2901 days ago 0
0
|
1 answers 1 asked |
|
Will this fit? | 0 answers 2 asked |
|
would it fit
Would this fit in a regular cranestock? If not, what 11.1 Li-Po battery will?
3146 days ago Trym G
0
0
(I have this same question)
Staff Answer:
It should fit 3142 days ago 1
0
|
1 answers 1 asked |
|
Will this fit?
Will this fit the Krytac pdw and still shoot 350 fps
3256 days ago Liam D
0
0
(I have this same question)
Staff Answer:
It will likely be too long 3255 days ago 0
0
|
1 answers 1 asked |
|
will it fit in E&L Airsoft Full Metal AKM A101 AEG Airsoft Gun
E&L Airsoft Full Metal AKM A101 AEG Airsoft Gun
3256 days ago shanna s
0
0
(I have this same question)
Staff Answer:
No 3254 days ago 0
0
|
1 answers 1 asked |
|
What is a lipo sack? Why does it have to be faced downward? | 0 answers 1 asked |
|
What are the dimensions?
What are the dimensions, preferably in millimeters, of the cell pack?
3265 days ago Christopher K
0
0
(I have this same question)
Staff Answer:
You can use a converter online that will go from inches to millimeters. Click the specs tab and you can find the dimensions. 3254 days ago 0
0
|
1 answers 1 asked |