Masamune Extreme Precision 6.01mm AEG Inner Barrel for KJW M700/PSG1 Plus (640mm)
[Z10H07][06171 / PE-P1-023]
OUT OF STOCK
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
The Airsoft GI Masamune 6.01mm Precision Barrel is the tightest bore barrel available and the only choice for players looking for the best possible accuracy and range. The barrel will require modifaction to the gun to fit properly.
Specifications:
Manufacturer: Masamune
Length: 640mm/25.20"
Bore: 6.01mm
Please Note:
- The bore of this barrel is so tight around the BB that even the smallest obstruction in the barrel will cause a jam when fired. This barrel is recommended ONLY for advanced/experienced players that take the responsibility to clean their barrels regularly in order to avoid jams.
- Modification is required to make this barrel fit. For more specific information please contact our tech department at [email protected].
Airsoft GI recommends cleaning this barrel after every day of use.
- Specifications
- Manufacturer: Airsoft GI
- Color: Silver
- Size: 640mm
- Material: Brass, Chrome Coated
- Package Includes: One (1) Precision Inner Barrel
see 2 reviews
| Write a Review
verified buyer
verified buyer
R. DEWEES
|
2010-06-10
Product Information:
I have always gotten outstanding performance out of 6.01mm tightbore barrels and this one is no different!
Pros:
- Simple upgrade but yields great performance
-Adds range and accuracy as well as some FPS to your gun
-Affordable
Cons:
The barrel will not for the KJW M700 when you first get it. it will require modification which can be a problem for some but it clearly states that on the product information section. be warned if you get this barrel for the KJW M700 be prepared to modify it to fit
I have always gotten outstanding performance out of 6.01mm tightbore barrels and this one is no different!
Pros:
- Simple upgrade but yields great performance
-Adds range and accuracy as well as some FPS to your gun
-Affordable
Cons:
The barrel will not for the KJW M700 when you first get it. it will require modification which can be a problem for some but it clearly states that on the product information section. be warned if you get this barrel for the KJW M700 be prepared to modify it to fit
B. BARKER
|
2015-01-21
Product Information:
Barrel is good. Appears to be sprightly quality. It is 10 mm longer than the stock barrel and 0.09 mm tighter bore. The only modification needed is to remove the front sight, then remove the two screws holding the front mount. Pull out the Orange tip. Now you can install this barrel. The only problem is that there's nothing holding it in place in the barrel once you do that. I just made some electrical tape spacers. Increased accuracy greatly. Made the gun louder. Some might see this as a con, but it is intimidating.
Pros:
Increased accuracy, fps, and range,
Cons:
Can't use with orange tip
Makes gun loud
Barrel is good. Appears to be sprightly quality. It is 10 mm longer than the stock barrel and 0.09 mm tighter bore. The only modification needed is to remove the front sight, then remove the two screws holding the front mount. Pull out the Orange tip. Now you can install this barrel. The only problem is that there's nothing holding it in place in the barrel once you do that. I just made some electrical tape spacers. Increased accuracy greatly. Made the gun louder. Some might see this as a con, but it is intimidating.
Pros:
Increased accuracy, fps, and range,
Cons:
Can't use with orange tip
Makes gun loud
|
|
Will this barrel be able to work for a Mk96?
I was looking for a longer tight bore barrel for my Mk96. Meaning longer than 510mm.
3529 days ago Ludwig B
0
0
(I have this same question)
Staff Answer:
That is going to be too long for that gun 3526 days ago 0
0
|
1 answers 1 asked |
|
|
Can this work for a Mk 96? | 0 answers 1 asked |
|
|
What modification needs to be done to the barrel in order for it to fit a KJW M700? | 0 answers 3 asked |
|
|
Vsr
Can I put this in a VSR tech gun, I have a barrel extension to cover the extra length
3547 days ago Victoria F
0
0
(I have this same question)
Staff Answer:
It will not work in a VSR style gun without modification 3546 days ago 0
0
|
1 answers 1 asked |
Search Tags: Upgrade Tokyo Marui Accuracy
