Burst Wizard 3 Small Tamiya Connector Mosfet
[S04J06][17618]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Specifications:
Manufacturer: Burst Wizard King Kong Super 3
Modes: Programmable
Package Includes: One (1) MOSFET System
Features:
Plug-And-Play or Hardwire ( Your Choice ! )
All the Burst Wizard King Kong Super 2 features
No Trigger Response Loss
ROF Reduction
Up to 3 rounds or x-rnd burst per trigger pull
Real Steel ROF 3-RND Burst & Fullauto MILSIM
Magazine Capacity & Change Time MILSIM
LiPo & LiFe Battery Low Voltage Protection
Any Battery Type From 7.2V to 16.5V
Smallest Size 1.3"L x 0.6" W x 0.4" H
- Specifications
- Manufacturer: Burst Wizard
- Color: Black, Red
- Material: Rubber, Silicone, Metal, Plastic
- Package Includes: One (1) MOSFET System
Fantastic little device. Don't let the competitors fool you, this one's got it all and more. To be fair- mine is hardwired. It was a piece of cake to do (the BW3 has a big solder pad for the trigger wire, makes it easy) and the advantages are immediately apparent compared to leaving the motor current going through the trigger. Yes, the trigger response is much improved with a hardwire and the active braking makes followup shots very consistent. The burst feature is pretty flawless (took some fine tuning due to extremely high ROF in my case) and the fire select modes for Real Steel are very easy to use.
FYI, if you're going to do a hardwire, take the time and do it right. Don't leave the battery power going up to the switch then back down, simply go direct from the BW3 to the motor. I was able to touch up my gearbox enough to permit 2x12ga and 2x24ga wires to pass through without getting snagged on anything (is quite a squeeze though!). My Burst Wizard is feeding a Tienly GT45000 from a Matrix 25c 4000mAh 11.1v LiPo.
Pros:
Multiple fire modes
Real Steel
Piston cyclic control (preload, active braking)
Very fast trigger response
LiPo safety detection
Fault protection
Cons:
Would be nice if the power wires didn't exit on the same side of the BW3. It's a bit funky bending them back over the mosfet in the buffer tube and makes it harder for someone to use certain configurations of nunchuck batteries.
|
2v3
what does the 3 do compared to two like other than the features of the 2 what does the three have that the two does not
2197 days ago carter b
0
0
(I have this same question)
Staff Answer:
Yes 2197 days ago 0
0
|
1 answers 1 asked |
|
wil it protect against a 11.1 lipo if i dont hard wire it
if i just pllug it in will it protect a gainst a 11.1 lipo
2197 days ago carter b
0
0
(I have this same question)
Staff Answer:
It will be able to handle an 11.1 LiPO battery. 2197 days ago 0
0
|
1 answers 1 asked |
|
battery
does a nimh battery work with this ?
2753 days ago Brenan H
0
0
(I have this same question)
Staff Answer:
It should be compatible with most airsoft gun builds. 2192 days ago 0
0
|
1 answers 1 asked |
|
m249
Will this work with my A&K m249? I would like 3 round burst along with full auto ?
2775 days ago matt d
0
0
(I have this same question)
Staff Answer:
It should work 2774 days ago 0
0
|
1 answers 1 asked |
|
can i make my gun shoot safe-semi-semi with the mosfet?
safe-semi-semi
3131 days ago Jacob O
0
0
(I have this same question)
Staff Answer:
The mosfet should be able to alter how many BB's are shot on the Auto Selector. 3130 days ago 0
0
safe-semi-semi
3131 days ago Jacob O
0
0
(I have this same question)
Staff Answer:
The mosfet should be able to alter how many BB's are shot on the Auto Selector. 3130 days ago 0
0
|
2 answers 1 asked |
|
Krytac spr
Will this work in a krytac spr or do I need to the the already installed mosfet out?
3206 days ago Will S
0
0
(I have this same question)
Staff Answer:
It should work 3205 days ago 0
0
|
1 answers 1 asked |
|
deans
Does the wizard 3 come with deans connectors
3257 days ago Dolores R
0
0
(I have this same question)
Staff Answer:
No. 3205 days ago 0
0
|
1 answers 1 asked |
|
Should you leave the fuse in the gun and still use this or remove the fuse?
In using this I blew my first ever fuse after ten years of playing.
3262 days ago Eric G
0
0
(I have this same question)
Staff Answer:
You can do either or. Both will work either way. 3207 days ago 0
0
|
1 answers 1 asked |
|
Amperage Limits | 0 answers 1 asked |
|
Lancer tactical ak74u Lipo protection
Will this allow me to use a tenergy 11.1 Lipo without destroying my gun
3387 days ago Abdullah G
0
0
(I have this same question)
Staff Answer:
No, it will not 100% protect the gun 3382 days ago 0
0
|
1 answers 1 asked |
|
lipo
Will this protect my trigger contacts from getting burned out from a 11.1 lipo?
3399 days ago Howard E
0
0
(I have this same question)
Staff Answer:
It will help protect them 3397 days ago 0
0
|
1 answers 1 asked |
|
Super 2 v. Super 3
Whats the differences between the price?
3427 days ago Anthony B
0
1
(I have this same question)
Staff Answer:
The Super 3 has more features 3426 days ago 0
0
|
1 answers 1 asked |
|
CA90TR
Will it fit in a classic army CA90TR
3477 days ago Cool G
0
0
(I have this same question)
Staff Answer:
Most likely not 3475 days ago 0
0
|
1 answers 1 asked |