Systema is without a doubt the best manufacturer of high quality airsoft parts, accessories, and guns; and these standard ratio gears are no exception. Systema has set the standard for all others to follow, these gears have been relentlessly researched and tested before they were put into production. They are made from the highest quality materials, therefore very strong, and recommended for use with M130 springs or less.
Model: Genuine Ratio gear set
Gear Ratio: 18.72:1
Actual gears may differ from those pictured.
These gears are great. They are light and strong, and (for me) increased my rot quite a bit. There is one thing that I think could have been better and that is the fact that there is only 2 anti-reversal teeth on the gear. My stock ones had 3 or 4 of these and now the spring isn't stopped as soon causing bbs to roll down the barrel every once and a while. This is with a Classic Army V2 gearbox.
Good speed/torque ratio
Only 2 anti-reversal teeth
2010-01-18 09:34:55 M. PEREZ
For: Systema Genuine Ratio gear set
These gears are great for the money. In the picture they the gears as grey in color, but they are a semi-glossy black. I've had these gears in two of my guns for about 3 years and are still running like new. No sign of wear and tear.I am running around 320 fps and around 24-25bbs per second with the G&P M120 HIgh Speed Motor, and a large Intellect 9.6v 3600mAh battery. These gears have no problem holding up that fast. Would recommend these gears if you play mostly indoor and running under 350fps.
-color is black not grey like most gears
...........i've never known a con for these gears...................
2008-04-08 15:49:46 T. HESS
For: Systema Genuine Ratio gear set
Great gears for the money. I shoot with an m120 spring and hummer 1100 motor and they have held up fine. Only downside is they are much louder than stock gears, at least on a G&G GR16.
Some of you may know that I have been working on my airsoft guns for approximately five years now. From AEG's to GBB's. I've always had a reason to repair or upgrade a few guns here and there. I've been playing Airsoft for about six years now. I usually prefer the fast paced CQB games, but I do play Milsim games when asked to. I started playing airsoft at a place called Airsoft Playground before Tac City North was around. On days that I do play, the most common type of Airsoft Gun I see on the field is an AEG. A lot of people, back then, were not very knowledgeable on the internal of an Airsoft gun. To start off, different airsoft guns have different versions gearbox. However, the types of parts inside are all the same. One of the most important parts is the gears, which operate the internal of the airsoft gun.
Airsoft GI sells a wide variety of gears from different companies suitable for your limits and desires. To those just looking to increase the durability of your gun, Echo 1 Performance Gear Sets have different ratio gear sets from speed to torque. Continuing up the ladder, for those that are looking to increase both performance and durability, Siegetek gears are the way to go. The type of material Siegetek uses as well as the precise specification of every tooth spacing and diameter on the gear shaft are what give them their name. Siegetek, former RiotSC, has manufactured gears for some time now but it is only recently that Airsoft GI has finally carried these amazing products. Whether, you want a high speed setup or a designated marksman rifle that shoots at 600+ feet per second, their selection of gears can handle them all. The only downside is that currently, they are only offered to airsoft guns that use a Version 2 or a Version 3 gearbox.
Don't think Echo 1 and Siegetek are the only two brands that I would recommend. Airsoft GI carries gears from manufacturers such as Modify, Bravo, and Prometheus, which are great gears as well. Some manufacturers such as SHS, X- Hightec, Combat Squad, etc. also manufacture great gears; however, in my opinion, they are not as well made as Siegetek. Once you have decided what gear set you want, next is the installation. For those that are just beginning to learn to upgrade their gun, its important that you find a qualified technician, whether its a recommendation from a friend or a store tech and you trust. The techs at Airsoft GI are highly qualified for any work done to any gun.
When I work on my airsoft guns, I try to depict the best way to achieve maximum efficiency while maintaining my desired velocity and rate of fire. I would choose a gear set with a given ratio to calculate an approximate rate of fire output on a certain Lithium Polymer battery. I would then polish my gears to reduce friction between the shafts and bearings. By polishing those critical areas, any grease and lubricant applied will be evenly distribute along those surfaces, and prevent them from going to unwanted places.. I use a different lubricant for the compression parts, but that will be another article..
In conclusion, by determining the right set of gear and reducing as much friction on the surface as possible, you could achieve a reliable,
long lasting setup. But most importantly, unless you are working on your own guns, itís important that you have the right technician for the job. I am Marq, be safe, and get out and play airsoft.
Please Note: Please be respectful and do not use any profanity. Any questions regarding the removal of the orange tip will be deleted.
This product was added to our catalog on Friday 18 April, 2003.
Disclaimer: All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them. Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law. By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.