|Airsoft GI G4-A5 URX3 DMR AEG Airsoft gun
Manufacturer: Airsoft GI
Nylon Fiber CNC RIS Sniper DMR Rifle Full Stock High Capacity M4A1 KAC Knight's Armament URX 3.1 M16 M4 M4a1 M16A4 Custom Rifle Designated Marksman G4 A5 Preupgraded 6.03mm Inner Barrel
- Aftermarket 13" URX3 CNC Aftermarket Rail System
- G&G Pneumatic Blowback System
- Functional Forward Assist / Spring Release
- Pre-Upgraded with 509mm 6.03 Tight Bore Inner Barrel
- FPS: 400-420
- Airsoft GI Videos
- Product Reviews
- Questions & Answers
Never before have we offered a gun with such a high value per dollar ratio. The foundation is a special Combat Machine Blowback M4 with a crane stock that's wired to the back. The brilliant techs at Airsoft GI have fitted a one piece outer barrel, 13" URX Free Float RIS, gas block. We've worked out a special program with Combat Machine to send us OEM parts to build a special pneumatic blowback M4 with a crane stock and the wires to the back, so we can eliminate the need for a PEQ box and keep a clean look. The Combat Machine was carefully chosen for their high quality, reliability and incredible value. We've dropped the G4 straight onto the ground from 8ft and 9ft with no visible damage to the body, this is the strongest plastic receiver on the market. Additionally, with the innovation and imagination from the Airsoft GI technical team we are building some of the highest quality guns that money can buy.
This incredible offer is only available at Airsoft GI. If you were to buy all these parts individually it would cost over $410.00!
- 170 for the base gun
- 110 for the rail
- 35 for the barrel
- 27 for the gas block
- 28 for the 6.03mm Precision Inner Barrel
- 40 for the crane stock (assuming the gun is already wired for a crane stock)
Only Airsoft GI can save you that much money on such high quality items.
Manufacturer: Airsoft GI, G&G
Muzzle Velocity: 400-420 FPS
Magazine Capacity: 450 rounds
Battery Type: Nunchuck (similar type batteries will also work, call Airsoft GI if you require more clarification)
Battery Connector: Mini
Package Includes: Gun, High Capacity Magazine
Special Combat Machine Model Base Gun
Pneumatic Blowback System
13" URX3 RIS
Metal Outer Barrel
Crane Stock, wired to rear
450 rounds Magazine
- Scope is not included.
- Battery and Charger not included.
- This product is covered under a 45 days warranty against workmanship and defect, for more details contact Airsoft GI.
- This product is built to order, please allow 1-5 days additional processing time.
|Magazine Capacity||450 Rounds|
|Fire Mode||Safe - Single - Auto|
|Battery Pack||Not Included|
|Package Includes||One (1) Gun, One (1) Magazine|
|Primary Build Material||Polymer|
|Outer Barrel Length||20in One Piece Outer Barrel|
|Stock Type||Crane Stock|
|Handguard||13in CNC URX3 Style RIS|
|Overall Length Extended||40 Inches|
|Overall Length Retracted||36.5 Inches|
|Weight Empty||5 Lbs 5 Oz|
|Gear Box||G&G BlowbG&G Blowback Gearbox (ack GeaPolycarbonaterbox (Ver. 2)|
|Cylinder Head Type||Polycarbonate|
|Cylinder Type||G&G Blowback Cylinder|
|Piston Head Type||Polycarbonate|
|Air Nozzle Type||M4/M16|
|Tappet Plate Type||Ver. 2|
|Spring Type||G&G 120|
|Spring Guide Type||Ver. 2 G&G Metal Spring Guide|
|Bushing Type||Brass Bushings|
|Gear Set Type||G&G Standard Ver. 2|
|Switch/Wire Type||M4 Rear Wired|
|Selector Plate Type||M4|
|Cut Off Lever Type||Ver. 2|
|Anti Reverse Latch Type||G&G Blowback Anti-Reversal Latch|
|Motor Type||G&G Standard Motor (Long)|
|Hop Up Type||Plastic|
|Inner Barrel Length||509mm|
|Sector Gear Clip||No|
|Quick Spring Change||No|
(see all 2 reviews) or (Write a Review)
|   2015-01-10 15:19:15|
B. HARRIS verified buyer
For: Airsoft GI G4-A5 URX3 DMR AEG Airsoft gun
If you are looking for a great looking gun that VERY accurate than this is the gun for you. But this gun will shoot a lot straighter with heavyer bbs. I use .36 in this gun.
Accruate (better with heavyer bbs)
None so far. i am just tying this so i can get to 30 characters, dont pay attention to this
|   2014-02-12 21:43:55|
C. MCCONE verified buyer
For: Airsoft GI G4-A5 URX3 DMR AEG Airsoft gun
love this gun. pretty versatile, range is great, stock fps with .2s is about 390. only real problems are the rail and the bushings.
The Bushings are brass, so they are not very strong(granted ive been using it since early November of 2013 and they are still working) but I would recommend getting steel bushings. which is another issue. It is near impossible to find non-bearing 8mm bushings from well known parts brands(well known being important to me cause I can ask about reliability and find reviews.)
now the thing about the rail, is that there are only rails on the ends(front of the system and back of the system near magwell) on except for the top. only way to get the rail pieces is to order them from dytac. also the rail, should you feel the need to replace it(don't, its lighter than hell) u need a special rench(not a delta ring wrench) to take it off. the is the ONLY way to do it. you can remove the bottom half by allen keys. just remove the screws and push the pin on the bottom near the mag well.
other than those, the other issues are very minor and are just an issue of breaking in the gun. I really love this dmr though.
blowback is nice (many compliments and very distinct)
removable flash hider
brass bushings(should replace whenever possible)
battery compartment not very long(but the stocks adjustable and I have long arms so it doesn't bother me
buttplate is hard to get off(not a con just annoying as hell, but atleast I know it wont fall off)
minimal mag wobble(I use king arm mags and the stock mag, but electrical tape in the magwell fixes that easy)
|(see all 2 reviews) or (Write a Review)
|This product should be back in stock on Saturday 06 June, 2015 00:00.
|This product was added to our catalog on Friday 08 November, 2013.
People who bought this item also purchased: