Valken Energy 7.4v 1200mAh 2s 20C LiPO Stick Battery
[K11B00][14731 /48047]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Please Note: Lithium Polymer batteries MUST be charged with a Lithium Polymer Balance Charger!
Description:
Lithium Polymer batteries are the newest available batteries for airsoft and other hobby toys. They are designed as a light weight, high output power source. This 7.4v Li-Po battery can deliver more power than 9.6v Ni-MH large type battery with only half of the size and a third of the battery cells.
Specifications:
Manufacturer: Valken
Voltage: 7.4v
Milliampere Hours: 1200mAh
Cell Type: Lithium Polymer (LiPo)
Connector Type: Mini
Recommended Fit: M4A1, AK, M14, MP5, G36
- The makers of LipoSack or its distributors or retailers assume no liability for failures to comply with these use and safety guidelines.
- By purchasing this product, the buyer assumes all risks associated with its intended use. If you cannot comply with these guidelines please return this product unused to your retailer.
1) Charge batteries in a safe area away from flammable materials and only on a non-flammable surface in a vented area. Do not discharge batteries below 3 volts/cell. Doing so may result in cell damage and subsequent cell venting upon a subsequent charge.
2) Do not recharge damaged batteries. Dispose of damaged batteries in the proper manner.
3) Some Lipo chargers on the market may have technical deficiencies that may cause it to charge the battery incorrectly or at an improper rate. It is your sole responsibility to assure that the charger you purchased works properly. Always monitor the charging process to assure batteries are being charged properly. Failure to do so may result in cell damage or fire.
4) In the event of a crash, you must remove the battery from the model for observation and place in a safe open area away from flammable materials.
LipoSack Use Instructions:
1) Ensure that charger rate is properly set and polarity is correct.
2) Attach charging leads to battery.
3) Place battery in LipoSack towards the bottom.
4) Place LipoSack on non-flammable surface.
5) Route charge leads through vent at the top seam of the LipoSack.
6) Close top flap of LipoSack and press hook and loop closure fully closed.
7) Charge battery using proper charging practices.
LiPoSack Use and Safety Instructions:
Battery safety:
∑ Lithium Polymer batteries are volatile. Failure to adhere to established charging guidelines may result in fire, personal injury and damage to property if charged or used improperly.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: Valken
- Color: Green / Black
- Material: Lithium Polymer
- Package Includes: One (1) Battery
|
Will it fit a top folding bizon pp 19
I am going to get the top folding bizon pp 19
1999 days ago Brandy H
0
0
(I have this same question)
Staff Answer:
yes it should fit easily. 1998 days ago 0
0
|
1 answers 1 asked |
|
Fit
Would this fit the Spartan Delta ak74u?
2424 days ago Logan G
0
0
(I have this same question)
Staff Answer:
It should 2171 days ago 0
0
|
1 answers 1 asked |
|
Fit
Will this fit KWA Full Metal KM4 RIS 2GX AEG Airsoft Gun?
3301 days ago Zachary D
0
0
(I have this same question)
Staff Answer:
Yes, there should be adequate room in the stock for this battery. 3300 days ago 0
0
|
1 answers 1 asked |
|
Fit
fit in echo Troy MRF c buffer tube?
3315 days ago Brandon B
0
0
(I have this same question)
Staff Answer:
Yes, there should be adequate space for this battery. 3314 days ago 1
0
|
1 answers 1 asked |
|
fit
kwa sr10 stock?
3329 days ago Teresa L
0
0
(I have this same question)
Staff Answer:
This gun has a Crane Stock capable of accepting a Nunchuck style battery. As long as the gun is equipped with Small Type Tamiya Connectors, we would recommend:<br> <br> <a href="http://www.airsoftgi.com/product_info.php?products_id=7638">Tenergy 9.6v 1600mAh NiMH Crane Stock Battery [Link]</a><br><a href="http://www.airsoftgi.com/product_info.php?products_id=16041">D Power Universal Smart Charger [Link]</a><br> 3328 days ago 0
0
|
1 answers 1 asked |
|
Fits
Does this fit the area amoeba
3411 days ago Martha S
0
0
(I have this same question)
Staff Answer:
It depends on which one 3410 days ago 0
0
|
1 answers 1 asked |
|
Magpul stock?
Will this fit in a magpul pts moe stock?
3434 days ago Julie S
0
0
(I have this same question)
Staff Answer:
It should 3426 days ago 0
0
|
1 answers 1 asked |
|
will this fit a lancer tactical | 0 answers 1 asked |
|
Mil-spec buffer?
Will this fit in a mil-spec buffer tube?
3549 days ago Lukas B
0
0
(I have this same question)
Staff Answer:
It should 3548 days ago 0
0
|
1 answers 1 asked |
|
Package
Does this include a LiPo sack or not?
3566 days ago Martin P
0
0
(I have this same question)
Staff Answer:
No it does not. 3565 days ago 0
0
|
1 answers 1 asked |
|
Fit
Will this fit a VFC M27 IAR
3566 days ago Martin P
0
0
(I have this same question)
Staff Answer:
Yes. 3566 days ago 0
0
|
1 answers 1 asked |
|
charger?
Does this come with a charger? It doesn't really explain in the description.
3580 days ago Garret G
0
0
(I have this same question)
Staff Answer:
It does not come with a charger. 3580 days ago 0
0
|
1 answers 1 asked |
|
Buffer tube
will this fit in a m4 buffer tube
3649 days ago Morgan S
0
0
(I have this same question)
Staff Answer:
It will be able to fit most M4 buffer tubes. 3649 days ago 0
0
|
1 answers 1 asked |
|
How big is this?
I have a pts masada sv and if it is much bigger than like have of a nunchuck I'll probably have a hard time fitting it.
3694 days ago Sean O
0
0
(I have this same question)
Staff Answer:
This should fit in the PTS Masada SV. 3692 days ago 0
0
|
1 answers 1 asked |
Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.