Intellect 10.8v 1600mAh NiMH PEQ2 Style Battery
[04085 / ERBAT26]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Intellect 10.8v 1600mAh NiMH PEQ2 Style Battery.
Specifications:
Manufacturer: Intellect
Voltage: 10.8v
Milliampere Hours: 1600mAh
Cell Type: Nickel-metal hydride (NiMH)
Connector Type: Mini
Recommended Fit: Custom PEQ2 box
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: Intellect
First off this battery is awsome. 1st make sure your gun can handle the stress that this battery will put on your gun because it RIPS. im easly putting out 25+ rps on my KWA M4. it will fit into A E1 PEQ box.
Pros:
Last a long time. (was at a 15 hr op and it had no noticeable drain on it)
easy fit into PEQ boxes
a realy long battery cord.
nice block design.
$55 cheaper than a lipo and it preforms the same.
Cons:
if your gun is not able to handle this you WILL destroy your gun
I love this battery!!! I will use this, AND ONLY this one for my rifles. I just purchased a SCAR so i will have to do some looking around sadly, but if you can, get this baby! it hops the rate if fire up so much, my CA M4A2 is the SAW of my squad. it is the beast.
Pros:
Rate of fire increase
long life
Cons:
only will fit i belive PEQ box
This battery freakin RIIIIIIIIPS!!!!!! I installed it in my modded out king arms M4A1, and its like a SAW now! If you want on demand power, then this battery pack is the one!! I love it and will use only this battery from now on!!
Pros:
ON DEMAND POWER!!!! Slim profile allows it to be put into smaller peq style battery boxes.
Cons:
If your gun isn't beefed up, it WILL burn up your internals
|
Fit
Would this fit in a peq box with the dimensions 64mm x 51mm x 16mm
3377 days ago Michael M
0
0
(I have this same question)
Staff Answer:
No 3376 days ago 0
0
|
1 answers 1 asked |
|
Tamiya | 0 answers 1 asked |
|
would it cause damage
Would this battery be ok for a Lancet tactical full metal pdw?
3681 days ago Orlando T
0
0
(I have this same question)
Staff Answer:
Airsoft GI only recommends a 7.4v Lipo or a 9.6v NiMH battery for that gun. 3681 days ago 0
0
|
1 answers 1 asked |
|
g&g gr15
I know that this would not fit unless i wire the battery to the front but would shred the internals of a g&g gr15?
3693 days ago Brian R
0
0
(I have this same question)
Staff Answer:
Airsoft GI only recommends a 9.6V NiMH or a 7.4V Lipo for this gun. 3690 days ago 0
0
|
1 answers 1 asked |