G&G Combat Machine CM16 R8-L M4 Carbine AEG Airsoft Rifle Battery & Charger Package (Tan)
[R08A00][11248 / EGC-16P-R8L-DNB-UCM]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Specifications:
Manufacturer: G&G
Model: Combat Machine R8-L AEG
Muzzle Velocity: 380-390 FPS
Magazine Capacity: 300 rounds
Color: Tan
Package Includes: Gun, magazine, battery, charger, cleaning rod, red dot sight
Features:
High quality polymer construction
Red dot included
Full length RIS unit
Adjustable crane stock
Please Note:
- This item does NOT include a Vertical Grip.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: G&G
- Muzzle Velocity: 380-390 FPS
- Magazine Capacity: 450 Rds
- Fire Mode: Safe - Semi - Full
- Color: Tan / Battery & Charger Combo
- Material: Polymer
- Battery Pack: Yes
- Package Includes: Gun Magazine Unjamming Rod Red Dot Sight Battery and Charger
- Outer Barrel Length: 14.5 inches
- Stock Type: Crane Stock
- Handguard: G&G 10 inch RIS Unit Tan Polymer
- Sight: Red Dot Sight
- Overall Length Extended: 36.5 inches
- Overall Length Retracted: 32.5 inches
- Cylinder Head Type: Polycarbonate
- Cylinder Type: Type 2
- Piston Head Type: Polycarbonate
- Piston Type: Polycarbonate
- Air Nozzle Type: M4/M16
- Tappet Plate Type: Ver. 2
- Spring Type: G&G 110
- Spring Guide Type: Ver. 2 G&G Metal Spring Guide
- Bushing Size: 8mm
- Bushing Type: Brass Bushings
- Gear Set Type: G&G Standard Ver. 2
- Switch/Wire Type: M4 Rear Wired
- Selector Plate Type: M4
- Cut Off Lever Type: Ver. 2
- Anti Reverse Latch Type: Ver. 2
- Motor Type: G&G Standard Motor (Long)
- Hop Up Type: Plastic
- Inner Barrel Length: 363 mm
- Sector Gear Clip: No
- Fuse: Yes
- MOSFET: No
- Connector: Small Tamiya
- Quick Spring Change: No
- External
- Primary Build Material: Polymer
- Internal
- Gear Box: G&G Gearbox (Ver. 2)
- Options
- Spring Release: No
I ordered this gun as a Christmas gift for myself and I am very happy with it! It feels very sturdy and I have not noticed any loose/wiggling parts on the gun or the stock. Shoots VERY accurately, one thing worth mentioning is if you purchase this gun on most other websites, it will be about 50 FPS lower, as AirsoftGI carries the High Muzzle Velocity version. Lastly, I can admit this is my first time investing in an AEG over $100. So while I might not have that much experience with quality airsoft guns, it is still very obvious that the quality beats anything under or up to the same price!
Pros:
-Very solid polymer body, not extremely heavy but definitely not light
-Gearbox does not sound whiny like I've experienced with cheaper guns
-Red dot sight is very easy to sight in, and has very dim settings for dark situations/very bright for outdoors
-Very accurate and bb does not drop at all in my 100ft backyard setting, can definitely reach a lot further; almost like bbs reach target in split second
Cons:
-Charging handle is non-functional, does not open hop up chamber
-Non blowback
-Does not come with iron sights (Might not be a con for most people, I am a fan of iron sights)
Bought this gun on Amazon, but I haven't been disappointed. Although hesitant to try another polymer gun after the crane stock randomly snapped in half last time around, this gun's build quality excels my expectations.
Pros:
·The polymer 10 in. RIS keeps this gun light; fatique is minimal in comparison to other like-sized guns in its class.
·The gun shoots accurately on both .20s and .25s, and still accurate when using canted ironsights/canted red dot (moreso on .20s than .25s).
·AR modularity (currently installing a 6.03 mm barrel and a mock suppressor
·The polymer reciever can take a fair amount of punishment.
·I love the battery compartment design; crane stock batteries have come a long way in 5 years.
Cons:
·The mag well prefers cmag-style mags, and it will accept KWA 120rd mags flawlessly.
·RIS polymer is quality, but you can't beat a good metal RIS(RIP old M4).
Combat Machine R8-L AEG Airsoft Gun ( Battery and Charger Package / Tan )
Pros:
Very Durable, accurate, great internals, great fps, solid build, high quality, simplistic and light weight, sturdy grip, stock, trigger guard, great price
Cons:
outer barrel could use some reinforcing, RIS is polymer so it scrapes easy, battery isnt super easy to get to
|
Mag
Does it comes with flash mag?
2726 days ago Rafiul H
0
0
(I have this same question)
Staff Answer:
Most airsoft guns will come with a standard high capacity magazine. 2153 days ago 0
0
|
1 answers 1 asked |
|
Weight | 0 answers 1 asked |
|
charger
is it a smart charger
2943 days ago Ned C
0
0
(I have this same question)
Staff Answer:
Its is a standard wall charger 2941 days ago 0
0
|
1 answers 1 asked |
|
Lipo?
Can I use an 11.1 Lipo to increase the ROF? Or is that not recommended for this gearbox
3119 days ago Vincent X
0
0
(I have this same question)
Staff Answer:
It is not recommended for this gearbox. 3116 days ago 0
0
|
1 answers 1 asked |
|
What kind of battery and charger does this gun come with
What kind of battery and charger does this gun come with
3260 days ago Tyler B
0
0
(I have this same question)
Staff Answer:
Basic charger with a 9.6v Nunchuck Battery. 3205 days ago 0
0
|
1 answers 1 asked |
|
Battery and suppressor
What kind of battery would be best for this gun BB? And Supressoer
3260 days ago Tyler B
0
0
(I have this same question)
Staff Answer:
9.6v Nunchuck or Crane Stock NiMH Battery. G&G or G4 0.25g BBs. Any Barrel Extension with a 14mm CCW thread pitch. 3206 days ago 0
0
|
1 answers 1 asked |
|
is it cw or ccw
does the orange flash hider come off clockwise or counter clockwise
3260 days ago Billy B
0
0
(I have this same question)
Staff Answer:
CCW 3206 days ago 0
0
|
1 answers 1 asked |
|
The name of the battery
WHAT IS THE NAME OF THE BATTERY THAT COMES WITH THE GUN?
3286 days ago frank h
0
0
(I have this same question)
Staff Answer:
G&G 3284 days ago 0
0
|
1 answers 1 asked |
|
Battery
Is the battery a 8.4 or 9.6?
3368 days ago Vaughan M
0
0
(I have this same question)
9.6
2948 days ago
Ned C
0
0
|
1 answers 2 asked |
|
Spring/upgrade | 0 answers 1 asked |
|
Red dot
Is the red dot adjustable
3557 days ago Dominic P
0
0
(I have this same question)
Staff Answer:
Yes 3556 days ago 0
0
|
1 answers 1 asked |
|
Weight? | 0 answers 2 asked |
|
What are the fire modes
Is it only safe and semi
3639 days ago william b
0
0
(I have this same question)
Staff Answer:
The Specs state is has safe, semi, and full auto 3639 days ago 0
0
|
1 answers 1 asked |
|
inner barrel
How long is the inner barrel?
3649 days ago Stephanie C
0
0
(I have this same question)
Staff Answer:
The inner barrel should be 363mm in length. 3648 days ago 0
0
|
1 answers 1 asked |
|
stock fit
will the Echo 1/JG M16 Stock fit on this aeg
3654 days ago Austen S
0
0
(I have this same question)
Staff Answer:
A full stock should be able to fit with some modification. 3653 days ago 0
0
|
1 answers 1 asked |
|
mag
can the MagPul PTS 70rd M4/M16 Short Mid Capacity AEG Magazine fit this gun? also thanks for all of your help when i ask questions
3659 days ago Austen S
0
0
(I have this same question)
Staff Answer:
Any magazine that is designed for the M4 platform should work in this gun. 3659 days ago 0
0
|
1 answers 1 asked |
|
will the SOCOM Gear SOPMOD Stock for M4 fit on this gun
...
3670 days ago Austen S
0
0
(I have this same question)
Staff Answer:
Yes it will fit. Slight modification may or may not be needed. 3668 days ago 0
0
|
1 answers 1 asked |
|
stock
what is a good solid stock that i can put on this gun not a crane style or standard m-4 stock
3670 days ago Austen S
0
0
(I have this same question)
Staff Answer:
Magpul or Mission First Tactical Stocks are really good. 3668 days ago 0
0
|
1 answers 1 asked |
|
does the Madbull Airsoft ACE Skeleton (Medium) fit on this gun
..
3674 days ago Austen S
0
0
(I have this same question)
Staff Answer:
Yes, the Madbull ACE Skeleton Stock will fit on this gun. 3673 days ago 0
0
|
1 answers 1 asked |
|
exactly how long is the gun?
exactly how long is the gun?
3713 days ago Brock H
0
0
(I have this same question)
Staff Answer:
The info can be found under the product specifications: <br><br> Overall Length Extended 36.5 inches<br> Overall Length Retracted 32.5 inches 3711 days ago 0
0
|
1 answers 1 asked |
|
Do any mock suppressor so fit on this gun
Do any fit on this gin with out having to take off the orange tip
3719 days ago John M
0
0
(I have this same question)
Staff Answer:
Consider this one: <a href="http://www.airsoftgi.com/product_info.php?products_id=3479">http://www.airsoftgi.com/product_info.php?products_id=3479</a>. 3718 days ago 0
0
|
1 answers 2 asked |
Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.