G&G Combat Machine CM16 R8-L M4 Carbine AEG Airsoft Rifle Battery and Charger Package (Black)
[R12A00][11247 / EGC-16P-R8L-BNB-UCM]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Specifications:
Manufacturer: G&G
Model: Combat Machine R8-L AEG
Muzzle Velocity: 380-400 FPS
Magazine Capacity: 300 rounds
Color: Black
Package Includes: Gun, magazine, battery, charger, cleaning rod, red dot sight
Features:
- High quality polymer construction
- Red dot included
- Full length RIS unit
- Adjustable crane stock
Please Note:
- This item does NOT include a Vertical Grip.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: G&G
- Muzzle Velocity: 380-400 FPS
- Magazine Capacity: 450 Rds
- Fire Mode: Safe Semi Full
- Color: Black / Battery & Charger Combo
- Material: Polymer
- Battery Pack: Yes
- Package Includes: Gun Magazine Unjamming Rod Red Dot Sight Battery and Charger
- Outer Barrel Length: 14.5 inches
- Stock Type: Crane Stock
- Handguard: G&G 10 inch RIS Unit Polymer
- Sight: Red Dot Sight
- Overall Length Extended: 36.5 inches
- Overall Length Retracted: 32.5 inches
- Cylinder Head Type: Polycarbonate
- Cylinder Type: Type 2
- Piston Head Type: Polycarbonate
- Piston Type: Polycarbonate
- Air Nozzle Type: M4/M16
- Tappet Plate Type: Ver. 2
- Spring Type: G&G 110
- Spring Guide Type: Ver. 2 G&G Metal Spring Guide
- Bushing Size: 8mm
- Bushing Type: Brass Bushings
- Gear Set Type: G&G Standard Ver. 2
- Switch/Wire Type: M4 Rear Wired
- Selector Plate Type: M4
- Cut Off Lever Type: Ver. 2
- Anti Reverse Latch Type: Ver. 2
- Motor Type: G&G Standard Motor (Long)
- Hop Up Type: Plastic
- Inner Barrel Length: 363 mm
- Sector Gear Clip: No
- Fuse: Yes
- MOSFET: No
- Connector: Small Tamiya
- Quick Spring Change: No
- External
- Primary Build Material: Polymer
- Internal
- Gear Box: G&G Gearbox (Ver. 2)
- Options
- Spring Release: No
I ordered this gun as a Christmas gift for myself and I am very happy with it! It feels very sturdy and I have not noticed any loose/wiggling parts on the gun or the stock. Shoots VERY accurately, one thing worth mentioning is if you purchase this gun on most other websites, it will be about 50 FPS lower, as AirsoftGI carries the High Muzzle Velocity version. Lastly, I can admit this is my first time investing in an AEG over $100. So while I might not have that much experience with quality airsoft guns, it is still very obvious that the quality beats anything under or up to the same price!
Pros:
-Very solid polymer body, not extremely heavy but definitely not light
-Gearbox does not sound whiny like I've experienced with cheaper guns
-Red dot sight is very easy to sight in, and has very dim settings for dark situations/very bright for outdoors
-Very accurate and bb does not drop at all in my 100ft backyard setting, can definitely reach a lot further; almost like bbs reach target in split second
Cons:
-Charging handle is non-functional, does not open hop up chamber
-Non blowback
-Does not come with iron sights (Might not be a con for most people, I am a fan of iron sights)
Bought this gun on Amazon, but I haven't been disappointed. Although hesitant to try another polymer gun after the crane stock randomly snapped in half last time around, this gun's build quality excels my expectations.
Pros:
·The polymer 10 in. RIS keeps this gun light; fatique is minimal in comparison to other like-sized guns in its class.
·The gun shoots accurately on both .20s and .25s, and still accurate when using canted ironsights/canted red dot (moreso on .20s than .25s).
·AR modularity (currently installing a 6.03 mm barrel and a mock suppressor
·The polymer reciever can take a fair amount of punishment.
·I love the battery compartment design; crane stock batteries have come a long way in 5 years.
Cons:
·The mag well prefers cmag-style mags, and it will accept KWA 120rd mags flawlessly.
·RIS polymer is quality, but you can't beat a good metal RIS(RIP old M4).
Combat Machine R8-L AEG Airsoft Gun ( Battery and Charger Package / Tan )
Pros:
Very Durable, accurate, great internals, great fps, solid build, high quality, simplistic and light weight, sturdy grip, stock, trigger guard, great price
Cons:
outer barrel could use some reinforcing, RIS is polymer so it scrapes easy, battery isnt super easy to get to
|
What type of battery does the scope use?
Scope battery?
2361 days ago Noah G
0
0
(I have this same question)
Staff Answer:
<a href=" https://www.airsoftgi.com/product/NcSTAR-CR2032-Lithium-Battery-24184/"target=blank�> <font color=blue> NcSTAR CR2032 Lithium Battery </font></a> 2198 days ago 0
0
|
1 answers 1 asked |
|
Silencer???
can the muzzle break come off and have a silencer attached?
2409 days ago Ryan L
0
0
(I have this same question)
Staff Answer:
Most airsoft guns should have 14mm counter clockwise threading. 2197 days ago 0
0
|
1 answers 1 asked |
|
magazine wont work
i bought this gun from airsoft gi first of all its awesome but it wont take hi caps is the gun broken it works like a charm with mid caps . when i use high caps it will shoot like 5 feet
2539 days ago Diane C
0
0
(I have this same question)
Staff Answer:
That sounds like a teching problem. Please call us to sort that out. 2211 days ago 0
0
|
1 answers 1 asked |
|
What is the range? | 0 answers 1 asked |
|
Can you take off the bottom rail?
For an m203 Grenade launcher
2800 days ago Dylan F
0
0
(I have this same question)
Staff Answer:
That is not necessary if you get an M203 that can be mounted to rail systems 2799 days ago 0
0
|
1 answers 1 asked |
|
Weight | 0 answers 2 asked |
|
Fore-Grip
If i wanted to put a Magpul USA Angled Fore-Grip on this rifle would the version 1 go on the rail system without interfering with the other rails or would it be recommended to get the version 2 Magpul USA Angled Fore-Grip that does not have the "wings" on it?
3259 days ago Michael M
0
0
(I have this same question)
Staff Answer:
Either will work just fine. 3205 days ago 0
0
|
1 answers 1 asked |
|
Can this gun handle a m100 spring? I need this guns fps to be indoor cqb fps
I need the gun to be at 300-350 fps
3294 days ago Matt T
0
0
(I have this same question)
Staff Answer:
Yes it can. 3280 days ago 0
0
|
1 answers 1 asked |
|
is this gun a blowback
i want to kmow
3295 days ago mical b
0
0
(I have this same question)
Staff Answer:
This product does not have a blowback. 3280 days ago 0
0
|
1 answers 1 asked |
|
Body upgrade
Would the "G&P Full Metal M4 M16 Airsoft AEG Custom Metal Receiver" work with this gun?
3321 days ago Jared W
0
0
(I have this same question)
Staff Answer:
No 3319 days ago 0
0
|
1 answers 1 asked |
|
Body
Could you trade out the plastic body for a metal one?
3323 days ago Jared W
0
0
(I have this same question)
Staff Answer:
Yes! G&G produces metal body kits that can be purchased directly from their U.S. branch. 3322 days ago 0
0
|
1 answers 1 asked |
|
magazine
Can this fit any Standard m4/m16 magazines
3335 days ago keon l
0
0
(I have this same question)
Staff Answer:
Yes 3333 days ago 0
0
|
1 answers 1 asked |
|
Is this gun really 380-400 fps? Because evike says its 310-340 fps.
Thanks
3362 days ago Benjamin K
0
0
(I have this same question)
Staff Answer:
When chronographed, the HV (high velocity) version that is carried by Airsoft GI was shooting at about 380 FPS. 3345 days ago 0
0
|
1 answers 1 asked |
|
Charger
Is the charger that comes with it a smart charger
3403 days ago Abdullah G
0
0
(I have this same question)
No,I believe it's a basic wall charger
3032 days ago
Gilbert C
0
0
|
1 answers 3 asked |
|
Rail
How long of a rail should I get for this gun. What brand would be good? Thanks
3521 days ago Jackson S
0
0
(I have this same question)
10 in
3105 days ago
Matt P
0
0
|
1 answers 1 asked |
|
Is the fps 370-400
Since people are saying its around 350 and I live in canada so I need my gun to go over 366 fps
3523 days ago Kristopher B
1
0
(I have this same question)
Staff Answer:
It should be able to be shipped 3521 days ago 1
0
|
1 answers 1 asked |
|
functional charging handle?
If you pull back the charging handle will the dust cover go down?
3542 days ago Nick S
0
0
(I have this same question)
Staff Answer:
It will not 3541 days ago 0
0
|
1 answers 1 asked |
|
is this neg or pos
Is this neg or pos
3569 days ago Adrian P
0
0
(I have this same question)
Staff Answer:
It should have CCW Threads 3568 days ago 0
0
|
1 answers 1 asked |
|
is this clockwise or ccw
What is the rotation cw or ccw
3569 days ago Adrian P
0
0
(I have this same question)
Staff Answer:
CCW 3569 days ago 0
0
|
1 answers 1 asked |
|
DMR
do you think i am able to effectively use this as a DMR?
3576 days ago Lorenzo S
0
0
(I have this same question)
Depending on the bbs I think you could
3186 days ago
Curtis M
0
0
|
1 answers 3 asked |
|
Can you put on an HK416 rail?
Can you put on a Hk416 rail or Daniel Defense RIS to replace the polymer rail?
3577 days ago Brandt C
0
0
(I have this same question)
Staff Answer:
Not a 416 Rail but it is possible to replace the rail with a Daniel Defense one. 3574 days ago 0
0
|
1 answers 1 asked |
|
Barrel Extinsion/Silencer
What barrel extension could be put on here (please put actual name) thank you!
3592 days ago Steve W
0
0
(I have this same question)
Staff Answer:
Any one that has a 14mm counter clockwise thread 3591 days ago 0
0
|
1 answers 1 asked |
|
barrel
does this gun have 14mm ccw threads if so how easy does the muzzle come off?
3592 days ago Austen S
0
0
(I have this same question)
Staff Answer:
It should have a 14mm counter clockwise thread 3591 days ago 1
0
|
1 answers 1 asked |
|
Full Stock
Would I be able to put on the Echo 1/JG M16 Style stock onto this gun? http://www.airsoftgi.com/product_info.php?cPath=745_30_141&products_id=2191
3605 days ago Nick M
0
0
(I have this same question)
Staff Answer:
It will most likely require modification for it to mount correctly 3605 days ago 0
0
|
1 answers 1 asked |
|
Battery?
when type of battery comes with this gun, is it a 8.4v? also should i get a 9.6v 1600 mah for this gun?
3651 days ago Noah s
0
0
(I have this same question)
Staff Answer:
The airsoft gun would need a 9.6v nunchuck battery between 1200mAh and 1600mAh. 3648 days ago 0
0
|
1 answers 2 asked |
|
Spring?
Can this handle a m120 spring stock? If so, what all would need to be done? Thanks
3655 days ago Tanner C
0
0
(I have this same question)
Staff Answer:
Yes this can handle an M120. You would need a new spring as well as disassemble the gearbox since this does not have a quick change spring system. It is recommended to re-shim the gun as well. 3654 days ago 1
0
|
1 answers 1 asked |
|
Upgrades?
How upgradabe is this gun and also can a barrel extension be put on it
3670 days ago Preston H
0
0
(I have this same question)
Staff Answer:
This gun can easily take aftermarket components as well as most external accessories. 3668 days ago 0
0
|
1 answers 1 asked |
Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.