Echo 1 Crane Stock for M4 w/ Buffer tube
[W06D04][02527 / ECHO M4 CRANE STOCK BLK]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The ECHO1 Crane Stock for M4 with buffer tube is a great way to improve the look of your M4. The crane stock provides a cheek rest for left and right handed shooters. This crane stock is designed to fit your CR123 batteries in the storage compartment, just like the original design. Some modification may be required to accommodate airsoft batteries.
Specifications
Manufacturer: Echo 1
Applications: M4/M16
This crane stock package comes with everything you need to install on your M4.
- Specifications
- Manufacturer: ECHO 1
The stock comes with the stock itself, the buffer tube, a washer, and a screw. It does not come with a backplate to cover up the rear end of your rifle. The washer and the buffer tube have a canal specially dremeled out for wires to run through, but the canal in the buffer tube runs short, and will cause the short cell of the battery to smash the wire.
The backplate on the stock itself does come off, but you need to put some muscle into it.
Or a flathead screwdriver, haha, either one. It will just need some force to take it off, but once it's off, it comes out easily.
I bought this product for my ECHO 1 M4 RIS so i figured it should work because it is the same company.
This is the worst stock ever. I asumed it would be just like the CA and it would be alot cheaper but i was very wrong. This takes a screw to open and is an incredible waste of time. I was at my local airsoft stor for 4 HOURS trying to get this stock on. I am buying a CA very soon and im never going to buy ECHO 1 inner or outer parts again. They make good guns but dont trust the stuff the sell after. Nothing good can come from this stock!
PLEASE NOTE!!!!!! I have absolutely no clue what Mr. Harrison is talking about!!! I found this to be a fantastic stock. It took slightly longer to install than other crane stocks I have replaced because it has a piece of metal you must put in to let the screw stay in place. The whole process took about ten minuets. After installing I looked for build quality and must say this is an exceptional stock for the money. If I had payed $80, I would still be pleased with the product. The back is easy to take off and has a large amount of space for a nun chuck 9.6 volt. There is an ever so slight wobble to the stock, but every crane stock does, so deal with it. The sides of the stock have large rubberized panels on them that make it INCREDIBLY comfortable to wield . Overall worth EVERY PENNY, very pleased with this stock and buffer tube.
Pros:
Large, comfortable panels on the cheek rests
VERY sturdy
Good, solid black color
The butt plate is comfortable
LOOKS SICK
Great price
Very roomy in the battery compartment
Six position adjustable
Cons:
Took about twice as long to install as a normal crane stock. For me about 10 minutes
Slight wobble
Overall, not much. I REALLY enjoy this stock. WORTH THE MONEY.
|
Will it fit? | 0 answers 1 asked |
|
will this stock work with a lancer tactical m4?
Lancer tactical
3256 days ago kipo k
0
0
(I have this same question)
Staff Answer:
It should be able to. 3254 days ago 0
0
|
1 answers 1 asked |
|
Will this fit on the KWA KM/SR series AEGs? | 0 answers 1 asked |
|
will it work on an A&K M16A4 spr | 0 answers 1 asked |
|
dimensions | 0 answers 1 asked |
|
Rewire
How much on average does it cost to get a gun wired to a crane stock
3555 days ago Jason C
0
0
(I have this same question)
Staff Answer:
It is the $45 tune up/repair service plus the $20 surcharge 3552 days ago 0
0
|
1 answers 1 asked |
|
battery
does this cover the battery so you cant see it or does it have it stick out
3573 days ago dewitt h
0
0
(I have this same question)
Staff Answer:
It should cover most crane stock batteries. 3573 days ago 0
0
|
1 answers 1 asked |
|
What is the largest battery I can fit in this?
3577 days ago Mike V
0
0
(I have this same question)
Staff Answer:
9.6v 1600 mAh Crane Stock Battery 3577 days ago 0
0
|
1 answers 1 asked |
|
does this come with the screw that screws into the gearbox??
wanting to get this for a jg upper and lower, need screw to come with it
3628 days ago Tristan D
0
0
(I have this same question)
Staff Answer:
It should include all the parts needed to install the buffer tube. 3627 days ago 0
0
|
1 answers 1 asked |
|
compatibility
is this stock able to fit on any m4 or just most popular brand m4s?
3639 days ago James D
0
0
(I have this same question)
Staff Answer:
It is compatible with most M4s. Not just the popular ones. 3638 days ago 0
0
|
1 answers 1 asked |
|
Will this work on the JG 614?
3639 days ago Mike V
2
0
(I have this same question)
Staff Answer:
This product should work on the JG 614. 3638 days ago 2
0
|
1 answers 1 asked |
|
What color is this Crane Stock?
Is it OD or Foliage green?
3677 days ago Liam M
0
0
(I have this same question)
Staff Answer:
This crane stock is black. 3677 days ago 0
0
|
1 answers 1 asked |
|
does this stock hold a battery
.
3681 days ago Olin T
0
0
(I have this same question)
Yes. At most, a 9.6v 1600 mAh Crane Stock Battery
3545 days ago
Ethan S
0
0
|
1 answers 1 asked |