Airsoft GI small logo

Condor Outdoor Hydro Harness (Tan)

[T11A08][13258 / 242-003]
Orders over $179 qualify for free shipping
Free Shipping for orders over $179 No Coupon needed
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.

Condor Outdoor Products Inc. has over 20 years of experience in the tactical/outdoor gear industry; specializing in tactical gear including vests, plate carriers, modular pouches, and packs. They are a licensed Multicam and A-TACS dealer. Condor Outdoor gear has become a staple in law enforcement, military, and airsoft industries given its quality and affordable price. More recently they have expanded to making more of their products in the USA and have added a tactical apparel line, offering technical performance jackets, base layers, and pants.

The Hydro Harness integrates into Condor Outdoor's line of modular chest rigs and provides the means to carry up to a 2.5 liter hydration bladder. It is compatible with models MCR4, MCR5, MCR6, and MCR7. The contoured shoulder straps and back panel are padded with mesh for comfort and airflow to offset the added weight of a hydration bladder. The interior hanging loop prevents bladders from bottoming out and helps properly distribute weight. An ambidextrous hydration tube port and keepers on each shoulder make the harness friendly for righties and lefties. A zippered flap enables refilling without having to remove a bladder. The rear of the harness also features MOLLE webbing for pouches, a secure-able drag handle, and loop fasteners.

If you are operating for an extended period of time then hydration is a must. The Condor Outdoor Hydro Harness brings that capability to their line of modular chest rigs.

Specifications:
Manufacturer: Condor Outdoor
Country of Origin: China
Material: 600 Denier Nylon
Weight: 1.12 lbs
Color: Tan

Features:

  • Compatible with MCR4, MCR5, MCR6, and MCR7 chest rigs
  • Shoulder and back panel are padded with mesh for comfort and airflow
  • Contoured shoulder straps with webbing and D-rings
  • Accepts up to 2.5 L bladder (not included)
  • Loop fasteners for patches, IFF tape, etc.
  • Interior hanging loop prevents bladders from bottoming out
  • Hook and loop keepers on each shoulder for hydration tubes
  • Ambidextrous hydration tube port
  • Zipper flap for refill without having to remove bladder from pack
  • MOLLE webbing on the rear of the carrier for pouches
  • Secure-able drag handle

Special Notes:
The Condor Outdoor Ronin Chest Rig is not included.

Specifications
Manufacturer: Condor Outdoor
Color: Tan
Size: 2.5 Liters
Material: 600D Nylon
Package Includes: One (1) Hydro Harness
see 3 reviews | Write a Review
verified buyer
E. PAKIESER | 2013-05-03
Product Information:
I love building light rigs for different guns using the Condor OPS Chest Rig, but I always missed having a place to put a hydration pack. I'm very happy they have made this.

The pouch is sewn in place, and also has MOLLE webbing on the bottom half. On the top half is the flap, which is held shut with zippers and velcro. There is a "trapdoor" flap for threading the hose through, and velcro loops on both sides of the suspenders to further aid in securing the tube.

Pros:
Very well made, and VERY adjustable for both length and girth.

Cons:
I would have rather seen a longer MOLLE panel on the back than a fixed, sewn in place pouch. I still like this design. I am thinking you could add a small hydro pack (like the Source 27oz) in its own pouch and then use the sewn-in pouch as a light backpack.
M. OCHELTREE | 2014-06-01
Product Information:
Short version of the review: if you want a hydration carrier that will directly integrate into a MCR 4, 5, 6, or 7, buy this and you'll be satisfied.
Long version of the review:
The Hydration Harness is a direct drop-in replacement for the shoulder straps for any of the MCR chest rigs.
FRONT:
The buckles are attached to straps for adjustment across the chest/waistline (I would strongly advise to not do was Image 3 out of 6 shows on the product page, it is not good for attempting to shoulder any airsoft gun. My recommendation would be to run the webbing through the rows of webbing). Continuing up the front, there are three rows of webbing wide enough for 3" MOLLE compatible sheaths or pouches to be placed. The right side of the harness has loop velcro sewn onto the front of the bottom two rows of webbing along with the space in between while the left side has no velcro. Continuing up the harness, there are metal, painted D-rings sewn onto the harness. Within the same webbing used for the D-rings is a rear-facing loop for further customization. Also included on the rig are two loops of hook and loop velcro for securing hydration and or communication lines on each side.
REAR:
Starting at the top is a drag handle that is only bartacked nearest to the handle. The handle itself has a sewn "passive" loop material that allows the drag handle to be stuck to a corresponding 1"x1" patch of hook velcro on the harness to minimize the profile. Beneath the drag handle is the top of the hydration pouch. Looking over the design, it seems that the original intention was for the hydration pouch to attach to harness via a patch of velcro running the width of the hydration pouch (1.5"x 8") This velcro has remained in the final designed, but has been stitched over on the sides to prevent full removal of the hydration pouch (if you removed the stitching for this, the product would be able to separate into two individual, working items) The velcro can be split, allowing any sort of attachments to it (preferably something flat like netting) Continuing down to the actual hydration pouch, the port again shows that it was a full flap, hinging at the top and secured by velcro on all three remaining sides. The bottom was modified such that a line of stitching now runs across it allowing only the left and right sides to open. (Again, removing this single line of stitching should allow the product to fully function) The access flap for the interior has a coil zipper running down each side along with a span of hook velcro at the bottom to fully secure the flap. On the outside face of the flap is a large 3" x 4" patch of loop velcro. Sewn into the flap is a folded piece of webbing that works as a handle to open the flap (the same sort of handle can also be seen at the top of the pouch) Beneath the flap are four rows of MOLLE style webbing. The interior of the hydration pouch fits a 2.5L hydration bladder and I would be hesitant to say that a filled 3L bladder will fit.
INTERIOR:
The harness has mesh lining where the padding like the original chest rig shoulder straps.
The interior of the hydration pouch has a center loop and two loops with velcro sewn on to secure any bladders placed inside. (I use a Source bladder and the hook and loop attachments worked fine.)
There is a none padded mesh-lined pass through for the waist buckle of the chest rig.
FINAL NOTES:
Like any sewn products checking the stitching and the workmanship is extremely important. I personally found that a small section of stitching was missing from the bottom the hydration pouch.

Pros:
Good value for price.
Included strap length is long enough to fit anyone.
Straps have sewn in velcro keepers.
Padding the the shoulders is sufficient for a combat load with hydration.
Webbing and D-rings allow end user customization.
Direct drop in replacement for shoulder straps.
Easily adjustable.
Hydration/comm. lines keepers.

Cons:
Poor quality control. (Product came new with damaged stitching)
Hastily, integrated new design decisions that were done with single lines of stitching.
Drag handle is only secured with one column of bartacking along with a standard "X" pattern.
Webbing on the front before the buckles is not secured with an "X" pattern.
Straps are too long for user. (6'1" and 140 lbs)
Aesthetically, lot's of long stitching ends present.
verified buyer
D. ROMANO | 2014-06-15
Product Information:
I got this hydro harness just a few days ago. I got it strapped up and fitted well and went for a mile jog down my road to see how it felt. A little loose on the lower back but over all sturdy, until I noticed that the padding the holds the waist belt on a MCR4 had come unstitched at the top. Bad quality control, atleast for mine.

Pros:
Comfortable, light, and great for the MCR4 chest rig.

Cons:
Bad stitching and low quality compared from my experience with Condor Outdoor. Seems like they got Rothco to make it.
 
mod
Could you mod this to fit the MCR1

3546 days ago
zac r
0
0

(I have this same question)
Staff Answer:
Only if you are good with a needle and thread

3543 days ago
0
0
1 answers
1 asked
 
Will it fit?
Can it fit on the Shellback Banshee Carrier?

3684 days ago
Logan F
0
0

(I have this same question)
Staff Answer:
This product will not quite fit correctly on the Banshee Plate Carrier.

3683 days ago
0
0
1 answers
1 asked
 
Compatibility
Is this Condor Outdoor hydro harness compatible with the MCR3?

3693 days ago
Mason R
0
0

(I have this same question)
Staff Answer:
These were designed for the MCR-4/5/6/7.

3693 days ago
0
0
1 answers
1 asked
Search Tags: OE TECH Water Hydration Carrier Bladder Reservoir Modular Chest Rig MCR4 MCR5 MCR6 MCR7 Desert Brown Dark Earth Ronin

For Questions, Answers and Comments:

Talk about the Condor Outdoor Hydro Harness (Tan) with your friends on the facebook comments box below:
Copyright © 2024 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.