CYMA M14 RAS Kit
[04642 / SB-C41]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
The Cyma M14 RAS Kit for AGM/CYMA/TM/ECHO1 M14 replaces the top heat shield above the barrel with a full functional rail interface system. In doing so it increases the potential of the standard M14 by allowing the user to attach aids like scopes and lasers. In addition to the functionality the RAS gives the AEG a more aggressive new look, it's just another great way to separate your M14 from the others out there.
- Specifications
- Manufacturer: CYMA
- Color: Black
- Material: Metal
- Package Includes: One (1) RAS Kit
see 3 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
J. MAZZUR
|
2009-07-12
Product Information:
I was very happy when i received this package. I opened the brown box to get a lot of brown paper and a smashed CYMA RAS Kit box. I opened it and got the RAS placed nicely in the foam, and the rail covers thrown in there. There were no rear scope mount or rings as shown, which i was very disappointed about. It fit on my TSD AEG M14 alright. It was very wobbly seeing it only clipped under the front ring and screwed on at the receiver, leaving the right side unattached. This might have been because it was a TSD M14, but the screw near the receiver made the back of the rail stick up a lot which makes my scope unusable now. It does not lay flat. Sorry ASGI for the first bad review, but im just being honest with what I got.
Pros:
Beastly looking
Aluminum/plastic rail covers
Cons:
Does not lay flat
Wobbly
Lack of spots to hold it on
Does not include extra pieces in the picture
Smashed box
I was very happy when i received this package. I opened the brown box to get a lot of brown paper and a smashed CYMA RAS Kit box. I opened it and got the RAS placed nicely in the foam, and the rail covers thrown in there. There were no rear scope mount or rings as shown, which i was very disappointed about. It fit on my TSD AEG M14 alright. It was very wobbly seeing it only clipped under the front ring and screwed on at the receiver, leaving the right side unattached. This might have been because it was a TSD M14, but the screw near the receiver made the back of the rail stick up a lot which makes my scope unusable now. It does not lay flat. Sorry ASGI for the first bad review, but im just being honest with what I got.
Pros:
Beastly looking
Aluminum/plastic rail covers
Cons:
Does not lay flat
Wobbly
Lack of spots to hold it on
Does not include extra pieces in the picture
Smashed box
verified buyer
B. M.
|
2010-08-24
Product Information:
I was excited when this arrived with my new CYMA M14 today. Unfortunately, the one that I received was broken. The entire front tab that holds down the front of the this RIS was snapped off. This rail isn't the best one, even if you own a CYMA M14. I superglued a metal tab in so it would fit snug, and so far no problems yet.
y advice would be to spend an extra $10 for Echo1's RIS.
Also, if you were wondering as I have about those four little bits next to the rail, well, the two round ones are mounts for the RIS to the barrel. The other two are for the back sites in case you would like to mount optics on them.
Pros:
-Made of metal
-Instruction booklet
-comes with a rear Weaver rail for the back site (those two bits on the bottom of the picture)
-Looks decent on an M14
Cons:
-Mine came broken
-You will need an allen wrench to fasten on the screws (two if you would like to attach the rear mount)
I was excited when this arrived with my new CYMA M14 today. Unfortunately, the one that I received was broken. The entire front tab that holds down the front of the this RIS was snapped off. This rail isn't the best one, even if you own a CYMA M14. I superglued a metal tab in so it would fit snug, and so far no problems yet.
y advice would be to spend an extra $10 for Echo1's RIS.
Also, if you were wondering as I have about those four little bits next to the rail, well, the two round ones are mounts for the RIS to the barrel. The other two are for the back sites in case you would like to mount optics on them.
Pros:
-Made of metal
-Instruction booklet
-comes with a rear Weaver rail for the back site (those two bits on the bottom of the picture)
-Looks decent on an M14
Cons:
-Mine came broken
-You will need an allen wrench to fasten on the screws (two if you would like to attach the rear mount)
J. DOE
|
2013-03-06
Product Information:
Alright, So when I got it it came in a little brown rectangular box, not too interesting. It came with everything pictured. The Rail covers aren't too amazing but they make the gun look somewhat alright. I wouldn't recommend them for rails that are higher quality machined though seeing as the didn't fit a AIM RIS for the M4 my friend had, we had to bend them off due to them being stuck. You'll need a hex key to put the rails on as well. The sight support is also pretty nice on the gun. If you wanted to make an M14 from CoD 4 you'd need a Socom while an M21 would be a standard variant. I suggest getting a UTG Guide rail instead of the one included, it didn't really fit the stripper clip guide on my CYMA. Excellent for the price though.
Pros:
Metal
Aesthetically nice
Rail Space
Cons:
Possible to strip screws
Rails aren't too high quality
Alright, So when I got it it came in a little brown rectangular box, not too interesting. It came with everything pictured. The Rail covers aren't too amazing but they make the gun look somewhat alright. I wouldn't recommend them for rails that are higher quality machined though seeing as the didn't fit a AIM RIS for the M4 my friend had, we had to bend them off due to them being stuck. You'll need a hex key to put the rails on as well. The sight support is also pretty nice on the gun. If you wanted to make an M14 from CoD 4 you'd need a Socom while an M21 would be a standard variant. I suggest getting a UTG Guide rail instead of the one included, it didn't really fit the stripper clip guide on my CYMA. Excellent for the price though.
Pros:
Metal
Aesthetically nice
Rail Space
Cons:
Possible to strip screws
Rails aren't too high quality
|
|
Will it fit? | 0 answers 1 asked |
|
|
Full Length or SOCOM
Is this a full length RIS or will this fit a SOCOM version. I have the SOCOM version. Thanks.
3531 days ago Jon M
0
0
(I have this same question)
Staff Answer:
Standard and SOCOM are the same, its just the length of the barrel that is different 3528 days ago 0
0
|
1 answers 1 asked |
|
|
Echo 1?
Does this work on the echo 1 m14??
3578 days ago Anthony B
0
0
(I have this same question)
Staff Answer:
It may work with modification 3578 days ago 0
0
|
1 answers 1 asked |
|
|
DOES IT INCLUDE THE BACK RAIL MOUNT? | 0 answers 1 asked |
Search Tags: External Accessories RIS Metal Hand Guard Upper Receiver Rail
For more information, please visit this products webpage.
