Airsoft GI small logo

Airsoft Systems Gen. 3 ASCU Mosfet for M4 AEG Gearbox

[13204 / ASY-ASCUv3-GBv2-KIT]
$99.95
( 2 Reviews ) ❤ Add to Wishlist
OUT OF STOCK

Battery Information Video
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.

The Airsoft Systems ASCU is easily one of the most intuitive Mosfet/ Fire mode converters on the market. Airsoft Systems took user feedback from the first version on the ASCU to improve and update it. The ASCU replaces the Mechanical switch and wiring of a standard AEG with an electronic style switch, much like the Systema PTW's fire control system. This increases both the reliability trigger response of your AEG. The ASCU also allows the user to choose from 4 easily selectable fire modes such as burst, full auto, semi only and burst/full auto. The addition of the ASCU to any AEG allows the gun to meet its full potential, low quality wiring and mechanical trigger mechanisms plague most airsoft guns and drastically increase electrical resistance which slows down the trigger response and rate of fire. Mosfets are a great innovation for Airsoft and the ASCU is at the top of the heap, bring your AEG to its full potential with the ASCU!

Specifications:
Manufacturer: Airsoft Systems
Model: ASCU Gen. 3
Package Includes: ASCU, Wiring, Fire Control Unit, Selector Plate, Cut Off Lever

Features:

  • Increases Trigger Response
  • Realistic Cycle Function
  • User Programmable Firing Modes
  • Switch Fire Modes In Seconds
  • Drop In Installation
  • No Soldering Required
  • Increases Battery Life
  • Increases Rate Of Fire
  • Improves Gearbox Reliability

Please Note:

  • This product is designed for Rear-Wired guns but can be modified by experienced gunsmiths for front-wire setup.
  • A 1 year factory warranty is provided that no physical modification has been made to the product.
  • Professional installation is recommended. Improper use or installation of upgrade parts are 99% of the time the cause of failures of these items.
  • Please thoroughly inspect any parts for defects before attempting installation. Due to the high possibility of damage from improper installation, we will not warranty parts after attempting installation.



Specifications
Manufacturer: Airsoft Systems
Color: Black, Red, White
Material: Silicone, Metal, Plastic
Package Includes: One (1) ASCU
see 2 reviews | Write a Review
verified buyer
S. REEVES | 2013-04-11
Product Information:
I recently bought the ASCU Version 3 Mosfet and installed it following the directions in the guide it came with.
My problem is every time I connect the battery I hear either one long beep or two short beeps from the motor then followed by the programing 1 beep, 2beep, 3 beeps and 4 beeps. After that I would pull the trigger and get one spin from the motor and then it stops followed by 2 beeps. That's all I get out of it!!!
Can any of you guys help me out with this problem ((( PLEASE )))

Pros:
4/11/2013
Great customer service!!!
They are trying to figure out the problem and will get back to me.
Easy instructions and fun to install.

Cons:
Having problems trying to figure out how to get it to code. But once I get this thing working im sure its gonna kick butt and I will wright another review.
G. SCOTT | 2013-04-07
Product Information:
I bought this from a local dealer but cannot say enough good things about this unit. I have a new KWA SR10 and have used it about 4 weeks now. I have almost 10k rounds through it already. My trigger started getting sticky or notchy if you will. I only use lipo batteries and was using an 11.1v 2000 mah 15c battery. I had forgotten that airsoft guns DO NOT have a lipo cutoff for low voltage and ended up destroying a brand new battery because of that fact. So I switched to 7.4v. because they are much cheaper and if I ruined another one no big deal. Well, as I said before with the sticky or notchy trigger, I talked with my local Airsoft dealer and he informed me that the trigger contacts were probably burned. I brought the gun in and he was absolutely right! (I have the worst luck with airsoft guns). He had the ASCU in stock and for an additional 40.00 he would install it and give me an additional 1 year warranty. Once the work was done, and I shot my gun, that device transformed my gun into something extremely beautiful. The ROF before with the 7.4v lipo was 16 RPS, with the ASCU installed, same battery ROF increased to 19 RPS. Using the 11.1v lipo previous ROF was 23 RPS, with ASCU ROF is 27 RPS! The gearbox is so buttery smooth compared to before and best part is I never have to worry about compressing a spring again because this device automatically sets the piston spring in the unload position. I use the default mode of operation. Semi stays semi in all modes it is only the Auto mode that gets anything done. Default for auto is 3 round burst for a single trigger pull or hold trigger for full auto. Best thing ever in my opinion. Reliability is not going to be an issue as this has a built in low voltage lipo cut off and will auto detect whatever size lipo you install up to 12v! Amazing. I believe my gun actually shoots better simply by adding this mechanism. While I have not tried any of the other brands on the market, I will say this is expensive as an upgrade or even as a precautionary addition to save batteries, but I know it is money well spent. I will buy one again when I get my primary CQB weapon.

Pros:
Lipo cutoff
Increase Rate Of Fire
1 yr full warranty
simple install (even though I had my local dealer perform the work, I watched him do the job)
Adjustable firing modes with audible tones
will not fire if a low battery is installed and will beep an alert for low battery
positions piston spring in non-compressed state automatically
smooth trigger operation

Cons:
price
some gearboxes might need a dremel tool for modification
 
Will this work with the siegetek dual sector gear? 0 answers
1 asked
 
Will this work in the XCR's split gearbox?
This is my detailed explanation.

3313 days ago
Jackson L
0
0

(I have this same question)
Staff Answer:
This MOSFET should work with most gearbox types.

3313 days ago
0
0
1 answers
1 asked
 
will this work in a VFC scar? 0 answers
1 asked
 
ASCU and the ICS Split Gearbox
I've read and heard about the incompatibility of the ASCU and ICS AEGs, but that was a while back. With Airsoft Systems developing their own AEG with a split gearbox design, has this changed.?

3595 days ago
William H
0
0

(I have this same question)
Staff Answer:
It will not work with an ICS

3593 days ago
0
0
1 answers
1 asked
 
Will thos work for a A&K SR25?
Will this work

3634 days ago
Jeffrey Y
0
0

(I have this same question)
Staff Answer:
Yes this will work.

3633 days ago
0
0
1 answers
1 asked
 
note on connector
On the connector there is a little note about how the connectors polarity is reversed. Do I need to cut the connector off and switch them? This is my first time doing anything with electrical stuff beside installing deans.

3713 days ago
Brandon W
0
0

(I have this same question)
Staff Answer:
All that would mean is that you'd have to install your motor flipped. Instead of positive terminal forward, it would be negative terminal forward. We'd recommend staying with the current polarity set up, as that was what the product was designed for.

3712 days ago
0
0
1 answers
1 asked
Search Tags: Fire Mode Converter Internal Upgrade Performance Gearbox MOSFET ROF Torque Power Regulation Regulator Drop In Wires AEG Trigger Assembly

For Questions, Answers and Comments:

Talk about the Airsoft Systems Gen. 3 ASCU Mosfet for M4 AEG Gearbox with your friends on the facebook comments box below:
Copyright © 2024 Airsoft GI
Disclaimer:

All airsoft guns are required to have the tip (1/4 inch) of the barrel permanently colored in blaze orange. No person may openly display or expose any imitation firearm (replica firearm), in a public place. The term "public place" means an area open to the public or exposed to public view and includes streets, sidewalks, bridges, alleys, plazas, parks, driveways, parking lots, automobiles, whether moving or not, and buildings open to the general public, including those that serve food or drink, or provide entertainment, and the doorways and entrances to buildings or dwellings and the grounds enclosing them.

Any person who changes, alters, removes, or obliterates any coloration or markings that are required for by any applicable state or federal law or regulation, for any imitation firearm (replica firearm), or device in any way that makes the imitation firearm (replica firearm) or device look more like a firearm is guilty of violating the state or federal law.

By accessing the Site, you certify that you are older than 18 years of age or the age of majority where you live, whichever is older; that you are the owner of any credit card used to purchase on items on the Site; that you are familiar with all local laws in your area affecting your legal right to access airsoft products; that any products you buy are for your own private enjoyment and that you will NEVER share these products with a minor in ANY WAY.