ASG 11.1v 1500mAh 3s 20c LiPO Stick Battery
[21625 / ASG-18156]
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Please Note: Lithium Polymer batteries MUST be charged with a Lithium Polymer Balance Charger!
Description:
ActionSportGames is a worldwide leader in the business of replica firearms and accessories manufacturing - including Airsoft guns, Airguns, Co2 guns and firearms replicas. They specialize in 1:1 scale replica guns and accessories for fun, action, sports, entertainment and collection. The assortment consists mainly of licensed models and exclusive subbrands of ActionSportGames. ActionSportGames was founded in April 2003 as a merger of the two largest Danish distributors of Airsoft Guns and accessories, Pedersen & Grobelnik A/S (founded 1992) and Vestergaard ApS (founded 1960). One of their goals is to become the preferred supplier in the firearms replica business through worldwide license agreements, quality brands and premium service.
This compact 11.1V Li-Po battery has a 3-cell one block construction. The biggest reasons to use a Li-Po is its smaller size and better power efficiency. Most Li-Po batteries are about the same size as a mini-type battery and is equal in power to a large type NiMH battery. No need for battery slings, battery boxes, or big batteries strapped on to guns. Li-Po is a power source for small carbines, PDW's, SMG's, etc. that doesn't require you to spoil the look of the gun, or run the risk of running out of power in the middle of a battle. Unlike traditional batteries, Li-Po gives a stable Rate of Fire, Through-out its use. Also, it is not necessary to discharge Li-Po batteries before charging them, allowing the battery to be charged in-between games.
Specifications:
Manufacturer: ASG
Configuration: One Block
Voltage: 11.1v
Capacity: 1500mAh
Cell Type: Lithium Polymer (LiPo)
Discharge Rate: 20C continuous discharge rate of 26 amps with 32.5 amp bursts.
Connector Type: Mini
Package Includes: One (1) Battery
LiPoSack Use and Safety Instructions:
Battery safety:
∑ Lithium Polymer batteries are volatile. Failure to adhere to established charging guidelines may result in fire, personal injury and damage to property if charged or used improperly.
1) Charge batteries in a safe area away from flammable materials and only on a non-flammable surface in a vented area. Do not discharge batteries below 3 volts/cell. Doing so may result in cell damage and subsequent cell venting upon a subsequent charge.
2) Do not recharge damaged batteries. Dispose of damaged batteries in the proper manner.
3) Some Lipo chargers on the market may have technical deficiencies that may cause it to charge the battery incorrectly or at an improper rate. It is your sole responsibility to assure that the charger you purchased works properly. Always monitor the charging process to assure batteries are being charged properly. Failure to do so may result in cell damage or fire.
4) In the event of a crash, you must remove the battery from the model for observation and place in a safe open area away from flammable materials.
LipoSack Use Instructions:
1) Ensure that charger rate is properly set and polarity is correct.
2) Attach charging leads to battery.
3) Place battery in LipoSack towards the bottom.
4) Place LipoSack on non-flammable surface.
5) Route charge leads through vent at the top seam of the LipoSack.
6) Close top flap of LipoSack and press hook and loop closure fully closed.
7) Charge battery using proper charging practices.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: ASG
- Color: Black
- Size: 180mm x 20mm x 17,30mm.
- Material: Lithium Polymer
- Package Includes: One (1) LiPo Battery
|
|
Will this fit in an m4 buffer tube?
I have an AirsoftGI custom FMG4-A4 DMR and want to get a lipo and mosfet in the buffer tube so I can use a slimmer stock. will this fit the buffer tube without modification?
2593 days ago Ian T
0
0
(I have this same question)
Staff Answer:
It is pretty long, so it may not fit. It would be a tight fit if it does work. 2112 days ago 0
0
|
1 answers 1 asked |
|
|
Will this battery fit in m4
Im using a crane stick and want a 11.1 battery will this work
2612 days ago Zack P
0
0
(I have this same question)
Staff Answer:
I would recommend a smaller battery, around 1000mah or 1200mah. That way it could fit in the buffer tube of the rifle. 2057 days ago 0
0
|
1 answers 1 asked |
